[Dx4win] mmtty
Joe Subich, W4TV
lists at subich.com
Tue Feb 3 10:00:33 EST 2015
Cort,
As always, start with the example configuration for DX4Win and MK II
from microHAM. In Router (Help | Download Documents) or on-line in
the MK II area at www.microham-USA.com/support.html.
DX4Win's support for MMTTY is a bit strange in FSK in that you must
run MMTTY stand alone from the same path as used in DX4Win to configure
the FSK port and set Configure MMTTY | MISC | TX Port to "COM-TxD(FSK)"
because there is no way to pass the port/FSK setting from the DX4Win
MMTTY window.
73,
... Joe, W4TV
On 2015-02-03 9:21 AM, Courtney Judd wrote:
> I have a question for you all... I am using FT2000D with microHam2 to
> WIN 7 PRO with Writelog and DX4WIN with MMTTY add on. Works great with
> Writelog but no dice with DX4WIn. MMTTY is located in
> C:\ham\mmtty\mmtty.exe and i use a virtual port 7 ... this works great
> with Writelog but when I select mmtty in DX4WIN from log entry/
> window/mmtty I get a window that says mmtty could not be started, click
> ok and an empty mmtty window opens that is empty and non-responsive. In
> DX4WIN's preference under RTTY I have the above address shown at the
> bottom in the MMTTY window, com port 7, type = none! Any ideas of what
> to try? thanks Cort K4WI
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the DX4WIN
mailing list