[Dx4win] FW: [Elecraft] Can't interface Dx4win to K3

[Robert Anthony]

I am using lp bridge and having trouble staying connected to dx4win 
also. I stay connected just fine until i go split operation and then i 
get a time out. Maybe it is the lpt bridge.

Bob
Bob Papa November
On 6/6/2014 12:07, Howard K2HK wrote:
>
>
>   From: Howard K2HK <howk2 at hotmail.com>
>   Date: June 6, 2014 at 1:30:27 PM
>   Subject:( K3)Can't interface Dx4win to K3
>   No response from Dx4win reflector so trying once more.K3 does not change frequency when using Dx4win 8.05. Simply times out when a spot is selected. It had been working w/o problem.
>   My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However,  when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports.
>   73,
>   Howard ..K2HK
>
>   		 	   		
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>