[Dx4win] FW: [Elecraft] Can't interface Dx4win to K3

[Joe Subich, W4TV]

Remove the Pigknob and LP-Bridge from the equation and see if the
problem continues.  It is entirely likely that two additional
processing stages cause enough delay that DX4Win is timing out.

73,

    ... Joe, W4TV


On 2014-06-06 12:07 PM, Howard K2HK wrote:
>
>
>
>   From: Howard K2HK <howk2 at hotmail.com>
>   Date: June 6, 2014 at 1:30:27 PM
>   Subject:( K3)Can't interface Dx4win to K3
>   No response from Dx4win reflector so trying once more.K3 does not change frequency when using Dx4win 8.05. Simply times out when a spot is selected. It had been working w/o problem.
>   My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I am using LP bridge for virtual serial ports. All programs respond as normal, i.e.,keying, kkey macro program, K3 utility. However,  when selecting a spot on DX spots screen I receive the radio time out, interface disabled. So far as I can tell the DX spot screen updates and all other features function normally. I have tried the cable directly to K3 and with another K3 with similar results. I have also changed serial ports.
>   73,
>   Howard ..K2HK
>
>   		 	   		
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>