[Dx4win] Wrong Mode Displayed

[Garry Shapiro]

Why would you set the CW cutoff to 10100? It seems the opposite to me. 
Mine is set to10500.

Garry, NI6T

On 10/16/2013 9:46 PM, Kostas SV1DPI wrote:
> file>preferences>qso tab>cutoff frequency and set the freq cut off for 
> 30m to 10.100. Please report if this correct your problem. I have 
> found one friend that this has not corrected the problem. I was so 
> sure that I made it myself via teamviewer but it didn't worked for 
> him. But it is the problem for many others.
>
> 73 Kostas, SV1DPI
>
> Στις 17/10/2013 07:00, ο/η W9RPM έγραψε:
>> Roger, I have that happen in DX4WIN when I use a Pan Adapter, Na3P 
>> and SDRIQ makes no difference with with it quite often. Played around 
>> with the timing, but still get it often. 73 John W9RPM
>> On 10/16/2013 10:21 PM, Roger Huntley wrote:
>>> Upon clicking on a 30 Mtr spot my program has suddenly started 
>>> showing the
>>> contact as a SSB contact in background mode with no way of changing 
>>> it to a
>>> CW QSO. Using a K3 with the proper mode showing on it.
>>> Any ideas would be appreciated.
>>> 73,
>>> Roger, W7VV
>>>
>>>
>>> ______________________________________________________________
>>> DX4WIN mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:DX4WIN at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html