[Dx4win] Wrong Mode Displayed

[Kostas SV1DPI]

file>preferences>qso tab>cutoff frequency and set the freq cut off for 
30m to 10.100. Please report if this correct your problem. I have found 
one friend that this has not corrected the problem. I was so sure that I 
made it myself via teamviewer but it didn't worked for him. But it is 
the problem for many others.

73 Kostas, SV1DPI

Στις 17/10/2013 07:00, ο/η W9RPM έγραψε:
> Roger, I have that happen in DX4WIN when I use a Pan Adapter, Na3P and 
> SDRIQ makes no difference with with it quite often. Played around with 
> the timing, but still get it often. 73 John W9RPM
> On 10/16/2013 10:21 PM, Roger Huntley wrote:
>> Upon clicking on a 30 Mtr spot my program has suddenly started 
>> showing the
>> contact as a SSB contact in background mode with no way of changing 
>> it to a
>> CW QSO. Using a K3 with the proper mode showing on it.
>> Any ideas would be appreciated.
>> 73,
>> Roger, W7VV
>>
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>