[Dx4win] Com Port Issue

[Doug MM0BJA]

For anyone following previous regarding the problem reported, a solution has 
been found by scrapping the USB virtual driver option and reverting to a 
USB/serial converter connected via the DB9 connector on the radio.

Best regards,
Doug - MM0BJA

----- Original Message ----- 
From: "n4dsp" <n4dsp at triad.rr.com>
To: <dx4win at mailman.qth.net>
Sent: Wednesday, December 18, 2013 7:44 PM
Subject: Re: [Dx4win] Com Port Issue


> Kostas,
> I do not disconnect the USB Cable.
>
> john
>
> On 12/18/2013 2:34 PM, Kostas SV1DPI wrote:
>> If I have understand well, you have a kenwood 590 connected via the usb 
>> cable. This connection creates a virtual com (there is not a real com 
>> port). The virtual com port is either com 3 and either com 7. As I know 
>> this only happens if you plug the usb cable in a different usb port. 
>> Please check if you plug it in the same usb port every time or in a 
>> different one. Normally if you plug it in the same port you will always 
>> get the same com port number.
>>
>> 73 Kostas SV1DPI
>>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html