[Dx4win] Com Port Issue

[Kostas SV1DPI]

Maybe you disconnect and connect an other cable (for example a mobile 
phone). So when it is connected before the radio turns on, the phone 
will get com3 and radio com7. Either the radio gets the com3....

73 Kostas SV1DPI

Στις 18/12/2013 9:44 μμ, ο/η n4dsp έγραψε:
> Kostas,
> I do not disconnect the USB Cable.
>
> john
>
> On 12/18/2013 2:34 PM, Kostas SV1DPI wrote:
>> If I have understand well, you have a kenwood 590 connected via the 
>> usb cable. This connection creates a virtual com (there is not a real 
>> com port). The virtual com port is either com 3 and either com 7. As 
>> I know this only happens if you plug the usb cable in a different usb 
>> port. Please check if you plug it in the same usb port every time or 
>> in a different one. Normally if you plug it in the same port you will 
>> always get the same com port number.
>>
>> 73 Kostas SV1DPI
>>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>