[Dx4win] 590S Port Problem-RESOLVED

[n4dsp]

Problem Resolved.
For the list  info COM 3 was being used by the Software CW Keying/PTT 
Control in
Preferences/CW. I never used cw keying so it may have just defaulted to 
that port but
installing the 590S driver it chose COM 3. So I reassigned the driver to 
COM 7 and all
is well.

john

On 12/15/2013 7:10 AM, n4dsp wrote:
> Radio/Start I receive an error message "i.e. BadLD-Specified comport 
> doesn't exist. Radio error #1.
>
> Serial Port specified for radio is in use by another device.
> Select a different port for the radio or the other device."
>
> But going to device manager/Ports I find the comport 3 being used by 
> correct driver by Kenwood,
> Silicon Labs CP210x to UART Bridge (com3).
>
> For the 590S to communicate with dx4win I have to reboot instead of 
> just clicking on Radio/Start.
>
> Help!
>
> john
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>