[Dx4win] grayed spot

[Dan Violette]

You can set a time when the "mailed" no longer counts in days in the Preference/QSO.  Else, like Kostas says you have worked them on that band so they are grey as designed so you do not try to work again so soon.  Dan KI6X

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Tuesday, September 18, 2012 10:04 AM
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] grayed spot

This is normal. It has no sense to work the same station again and waiting for a qsl another time. Or you should sent a qsl for the old qso, or you have sent and never replied or you are not in log so you should delete the qso. I make the following trick in cases like this. I mark the old qso as od5zz/mm. Not the best way but maybe a solution...

73 Kostas sv1dpi


Στις 18/9/2012 7:53 μμ, ο/η Roger D Johnson έγραψε:
> OD5ZZ was spotted today on 21260 but was grayed out. I have worked 
> Walid on SSB before but not confirmed as shown by the W in my country window.
> Spot should be red. I've checked all my settings but am stumped! Any suggestions?
>
> 73, Roger
>
>

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html