[Dx4win] Rotator Control

[ON4AOI]

Larry,
This is not possible and your beam could be pointing wrong also
If the station gets in via LP.
With F11 rotator will move Short path and ctrl+F11 via LP

Guy ON4AOI

-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens Larry McMillen
Verzonden: donderdag 22 november 2012 16:06
Aan: dx4win at mailman.qth.net
Onderwerp: [Dx4win] Rotator Control

I am using DX4WIN, Ver 8.05.

 

When I double click on a DX spot, the frequency and mode of my transmitter
(ICOM IC-756PROII) is changed to the spot frequency and mode.  Is there any
way I can configure so that the rotator will also rotate to the spot station
bearing?

 

Larry, W4WIV

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html