[Dx4win] Elecraft K3 Radio Interface problem.

[n4dsp]

Joe and Bud,
your suggestions solved my problem. Changed those settings and dx4win has 
been running for the last 8 hours without any issues. In addition to that 
later in the evening I also changed the default of the 
File/Preferences/Radio/Baud Rate from the default of 4800 to 38400 and did 
the same in the Config Menu of the K3.
Thanks for your help.

73
john-n4dsp


>
> I addition to what Bud has suggested, right click on the Computer icon,
> Select Properties, click on "Device Manager",  Open Universal Serial
> Bus controllers, select *each* USB Root Hub and "Generic USB Hub"
> entry, select the "Power Management" tab and *uncheck* the box marked
> "Allow the computer to turn off this device to save power".
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 5/9/2012 5:56 PM, Bud Semon N7CW wrote:
>> Hi John,
>>
>> Your computer may be putting the USB port to sleep.  In Windows 7 try 
>> this:
>>
>> Control Panel, Hardware and Sound, Power Options.  Next to Recommended
>> Settings, select Change Plan Settings.  Then click Change Advanced Power
>> Settings.  Click the + next to USB Settings.  Click the + next to USB
>> Selective Suspend Setting.  If you click on the Setting: Enable, you will
>> get a drop down box that allows you to change it to Disable.
>>
>> I hope that solves your problem.
>>
>> 73,  Bud  N7CW