[Dx4win] Hints for IC-781 ?

[Olli Tuppurainen]

Hi Mel 

Thanks for your ideas... this type of CT-17 substitute is in use
http://www.iw7ehc.altervista.org/CI-VinterfacciaEN.htm
Need to try with another one.

BR

Olli
OH6CT


> -----Alkuperäinen viesti-----
> Lähettäjä: Mel [mailto:ve2dc at videotron.ca]
> Lähetetty: 16. syyskuuta 2011 3:13
> Vastaanottaja: Olli Tuppurainen
> Kopio: REFLECTOR dx4win; oh8jt at sral.fi
> Aihe: Re: [Dx4win] Hints for IC-781 ?
> 
> Some of the older Icoms won't work with the cheap CT-17 substitutes that
> are not using RS232 levels. If it's a CT-17 or anything using a MAX232
chip it
> should work fine. I used 9600 baud, 1 stop bit and a 1000ms polling rate
with 4
> retries for years. Don't try polling too fast, the older rigs can't keep
up.
> 
> How are you interfacing the 781 with your computer?
> 
> On 2011-09-14 15:18, Olli Tuppurainen wrote:
> > A friend of mine just bought dx4win and he has IC-781 with RS-232
> > connection to PC. (PC with "genuing" RS-232 port)
> >
> > N1MM works perfectly with same PC and cable to radio but not DX4WIN.
> >
> > Baud rates and address ( 26 ) are OK.  Should the RTS and DTS be OFF
> > or ON by default?
> >
> > With 300Bd it worked for a few moments but then nothing.
> >
> > Any ideas?
> >
> >
> > Olli
> > OH6CT
> >
> >
> __________________________________________________________
> ____
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >