[Dx4win] Hints for IC-781 ?

[Mel]

Some of the older Icoms won't work with the cheap CT-17 substitutes that 
are not using RS232 levels. If it's a CT-17 or anything using a MAX232 
chip it should work fine. I used 9600 baud, 1 stop bit and a 1000ms 
polling rate with 4 retries for years. Don't try polling too fast, the 
older rigs can't keep up.

How are you interfacing the 781 with your computer?

On 2011-09-14 15:18, Olli Tuppurainen wrote:
> A friend of mine just bought dx4win and he has IC-781 with RS-232 connection
> to PC. (PC with "genuing" RS-232 port)
>
> N1MM works perfectly with same PC and cable to radio but not DX4WIN.
>
> Baud rates and address ( 26 ) are OK.  Should the RTS and DTS be OFF or ON
> by default?
>
> With 300Bd it worked for a few moments but then nothing.
>
> Any ideas?
>
>
> Olli
> OH6CT
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>