[Dx4win] 30M spots jump to USB when clicked

[Loren Hunt]

Well, I blindly followed some advise. I think some good some not good.

This was set wrong for 30M so I changed it:
"Also, be sure that CW Frequency cutoff is accordingly for 30 meters and 
all
 other bands. This is located at FILE|PREFERENCE|QSO.  "

Unfortunately I also did this:
"Just go to FILE|DATABASES|RADIOS|YAESU 
FT1000MP|VALUES|MODEVALUES|CW|READ:2|WRITE:3|FILE|SAVE
 CHANGES AND EXIT."

Now when I double click on a spot the log field is correct but the radio doesn't change. So I have broke the link for setting frequency on the rig. I did not right the values down before changing them (what was I thinking). There are 4 fields 
Read 2, 255 and Write 3,255 in the CW field. Now the odd part is, this is all I changed and now I no spots move the dial on the rig. I didn't mess with anything in SSB and yet double click a SSB spot and no change at the rig.

Again,
8.04
FT1000MP.

Thanks for help.
AD6ZJ, Loren