[Dx4win] QSL label marking question

[Loren Hunt]

Bud,
No, that doesn't do it. 

Specifically - Lets say I have USA confirmed on 80M/CW but I have worked 3500 USA stations on 80M/CW. Since I have the band/mode confirmed I don't want to blanket send out QSL cards. Using QSL --> Mark -->band/mode gets me all 3500! I would have expected 0.
If I use the report generator I get the correct result of 0.

Now lets say I need Fiji on 80M/SSB and have worked Fiji 2 times on 80M/SSB and have not sent cards. If I filter to just 3d2 80M/SSB the QSL-->Mark-->band/mode they both get marked. If I have the same filter selected but use the report generator I still get the same 2 calls marked.

So I can do what I want but the help menu lead me down the wrong path.

73
Loren


--- On Tue, 1/11/11, Bud Semon N7CW <n7cw at cableone.net> wrote:

From: Bud Semon N7CW <n7cw at cableone.net>
Subject: RE: [Dx4win] QSL label marking question
To: ad6zj at sbcglobal.net, dx4win at mailman.qth.net
Date: Tuesday, January 11, 2011, 1:17 PM

Loren,

If you set the filter for only unconfirmed QSOs, does that get you what you
want?

Hit F8 and then put an "N" in the CNFM box in the log entry window
(depending on whether you want to count LoTW and e-QSL, you may need to put
in 3 "N"s).  Then hit Enter.  That will select only the unconfirmed QSOs and
you can mark them for QSL.

73, Bud  N7CW

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Loren Hunt
Sent: Tuesday, January 11, 2011 1:55 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] QSL label marking question

Now that I have my log all in DX4WIN8.04 I see there are many QSOs that I
have not sent for needed bands or modes. So I went to set the QSL flag but
didn't want to touch each field manually. I can't get things to work the way
I would expect by following the help screen but I did find a way.

When I try (as the help screen states) "QSL --> Mark QSL" it wants to select
every QSO in the log, confirmed or not. Yikes! it's a good thing I read the
dialog box carefully. 

When I try "Reports --> Mark For QSL" it seams to work fine and mark only
those that are worked but not confirmed.

Do I have something set wrong, do I have some preference set wrong or is
this a bug?

73
AD6ZJ, Loren

______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html