[Dx4win] QSL label marking question

[Bud Semon N7CW]

Loren,

If you set the filter for only unconfirmed QSOs, does that get you what you
want?

Hit F8 and then put an "N" in the CNFM box in the log entry window
(depending on whether you want to count LoTW and e-QSL, you may need to put
in 3 "N"s).  Then hit Enter.  That will select only the unconfirmed QSOs and
you can mark them for QSL.

73, Bud  N7CW

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Loren Hunt
Sent: Tuesday, January 11, 2011 1:55 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] QSL label marking question

Now that I have my log all in DX4WIN8.04 I see there are many QSOs that I
have not sent for needed bands or modes. So I went to set the QSL flag but
didn't want to touch each field manually. I can't get things to work the way
I would expect by following the help screen but I did find a way.

When I try (as the help screen states) "QSL --> Mark QSL" it wants to select
every QSO in the log, confirmed or not. Yikes! it's a good thing I read the
dialog box carefully. 

When I try "Reports --> Mark For QSL" it seams to work fine and mark only
those that are worked but not confirmed.

Do I have something set wrong, do I have some preference set wrong or is
this a bug?

73
AD6ZJ, Loren

______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html