[Dx4win] Default Spot Bandwidth

[Dick Flanagan]

Oh, goodie!  My radio has five preset bandwidths:  250 Hz, 500 Hz, 
1.8 kHz, 2.4 kHz and 3.0 kHz.  Now I just have to figure out what the 
radio considers to be wide, medium and narrow.  :(

Thanks, Mel.

Dick

At 08:06 PM 2/16/2011, Mel wrote:
 >Yes and no...
 >
 >You can set your bandwidth to wide, medium or narrow, not a specific
 >bandwidth. Also, it's not mode specific... if you use medium, for
 >example, it will be medium for all modes. What that corresponds to in
 >bandwidth depends on how you set up the radio.
 >
 >On 2011-02-16 22:51, Dick Flanagan wrote:
 >> When I use DX4WIN to move to spots with my IC-7700, the radio is set
 >> to default bandwidths of:
 >>
 >> CW - 250 Hz
 >> RTTY - 250 Hz
 >> SSB - 1.8 kHz
 >>
 >> How can I change these default spot bandwidths to:
 >>
 >> CS - 250 Hz
 >> RTTY - 500 Hz
 >> SSB - 2.4 kHz
 >>
 >> Are these contained in the .rig file and, if so, are they easily changed?
 >>
 >> Dick
 >> --
 >> Dick Flanagan K7VC
 >> dick at k7vc.com
 >>
 >> ______________________________________________________________
 >> Dx4win mailing list
 >> Home: http://mailman.qth.net/mailman/listinfo/dx4win
 >> Help: http://mailman.qth.net/mmfaq.htm
 >> Post: mailto:Dx4win at mailman.qth.net
 >>
 >> This list hosted by: http://www.qsl.net
 >> Please help support this email list: http://www.qsl.net/donate.html
 >>
 >
 >
 >
 >
 >
--
Dick Flanagan K7VC
dick at k7vc.com