[Dx4win] RES: Again FT1000MP x CAT

[Jim Reisert AD1C]

Someone with a FT-1000MP, properly configured, should be able to help you.

You *could* download the trial version of DX4WIN 8.04, import your
preferences, and see if the problems you are having go away.  7.02 is
a very old version (from 2006).

73 - Jim AD1C

On Tue, Jun 8, 2010 at 7:24 AM, PT2CC Mac Hotmail <pt2cc at hotmail.com> wrote:
> Hi Andy.
> I don't have v.7.07 but I installed v.7.02 and the connection error is the
> same: Timed out and etc....
> I am thinking about the problem is on FT-100MP, but I don’t know how can I
> test it.
> How I can said MixW Log is working very well on all modes and changing bands
> and frequencies.
> Thank you very much.
>
> JIM, please help: any suggestion?
>
> 73, PT2CC Marcos
>
> -----Mensagem original-----
> De: Andy - UA0BA [mailto:ua0ba at norcom.ru]
> Enviada em: terça-feira, 8 de junho de 2010 07:49
> Para: PT2CC Mac Hotmail
> Assunto: Re: [Dx4win] Again FT1000MP x CAT
>
> Hello Marcos !
>
> I use FT1000MP with DX4WIN v.7.07.
> All work ok!
>
> In Preferences/Radio/
> set
> Type - Yaesu FT1000MP
> Default Address - 00
> Defaul Baud Rate - 4800
> COM Port - COM1
> Poll rate - 500ms
> Max tries - 6
> DTR hight - use
>
>
>  Good luck!
>  73! de Andy/UA0BA
>  in Norilsk ( RDA KK-66 )
> ua0ba at norcom.ru
>  ICQ: 11727506
>
>
>
>
>
>> Hi friends
>>
>> Anybody knows how can I check if RSR232 Rig connector/connection is
>> working
>> very well? How can I informed in last emails I have Mixw working but not
>> Dx4Win, using FT-1000MP. TS-480HX works very fine on two also Kenwood
>> ARCP480
>>
>> Rig Mode is VFO
>>
>> PC COM port 4800 N 8 2
>>
>> I have tested 2 cables DB9 female both sides - plan connection pin 2-.2,
>> 3->3 and 5->5. Please, help me.
>>
>> 73, PT2CC Marcos



-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us