[Dx4win] RES: Again FT1000MP x CAT

[Kostas Stamatis]

I think Jim hasn't solutions for all or he has?.
One friend of mine he had a faulty ft1000mp in past which didn't work with 
any program except mmtty.
I would say to try some already (?) installed programs like mmtty. Does it 
control your radio?
Install Ham Radio Deluxe also which is free http://www.ham-radio-deluxe.com/ 
(and after that you can use some special digi modes by the way and give me a 
new in feldhell- hi hi) and try also.Omnirig is a free program also 
http://www.dxatlas.com/OmniRig/ which does cat control. I suppose you have 
checked the continiuty of 5-5, 2-2 and 3-3 wires. Be sure that you have the 
multimeter on the right number pin every time. I had done this mistake in 
past.
As you saw Andy has almost the same seup as what i sent you some days ago...
But dx4win 8 and ft1000mp works for sure...
If you ever find a solution let us know..
Kostas SV1DPI


----- Original Message ----- 
From: "PT2CC Mac Hotmail" <pt2cc at hotmail.com>
To: <dx4win at mailman.qth.net>
Sent: Tuesday, June 08, 2010 4:24 PM
Subject: [Dx4win] RES: Again FT1000MP x CAT


> Hi Andy.
> I don't have v.7.07 but I installed v.7.02 and the connection error is the
> same: Timed out and etc....
> I am thinking about the problem is on FT-100MP, but I don't know how can I
> test it.
> How I can said MixW Log is working very well on all modes and changing 
> bands
> and frequencies.
> Thank you very much.
>
> JIM, please help: any suggestion?
>
> 73, PT2CC Marcos
>
> -----Mensagem original-----
> De: Andy - UA0BA [mailto:ua0ba at norcom.ru]
> Enviada em: terça-feira, 8 de junho de 2010 07:49
> Para: PT2CC Mac Hotmail
> Assunto: Re: [Dx4win] Again FT1000MP x CAT
>
> Hello Marcos !
>
> I use FT1000MP with DX4WIN v.7.07.
> All work ok!
>
> In Preferences/Radio/
> set
> Type - Yaesu FT1000MP
> Default Address - 00
> Defaul Baud Rate - 4800
> COM Port - COM1
> Poll rate - 500ms
> Max tries - 6
> DTR hight - use
>
>
> Good luck!
> 73! de Andy/UA0BA
> in Norilsk ( RDA KK-66 )
> ua0ba at norcom.ru
> ICQ: 11727506
>
>
>
>
>
>> Hi friends
>>
>> Anybody knows how can I check if RSR232 Rig connector/connection is
>> working
>> very well? How can I informed in last emails I have Mixw working but not
>> Dx4Win, using FT-1000MP. TS-480HX works very fine on two also Kenwood
>> ARCP480
>>
>> Rig Mode is VFO
>>
>> PC COM port 4800 N 8 2
>>
>> I have tested 2 cables DB9 female both sides - plan connection pin 2-.2,
>> 3->3 and 5->5. Please, help me.
>>
>> 73, PT2CC Marcos
>>
>> MSN pt2cc at hotmail.com
>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>