[Dx4win] PSK31 - how to transmit?

[Kostas Stamatis]

Hello David and HNY
first of all i am not familiar with your hardware
But i know abt dx4win...
To have psk working needs to setup these
FIle>preferences>control tab and setup the psk card. Better not choose the 
default but the right one both in receiveing and transmitting. If you have a 
mistake in tx, your rig will make ptt but you will have not a sound out and 
finally not pwr.
FIle>preferences>cw and setup your interface where says "software cw 
keying/PTT control". Becareful to have the right com port and possibly under 
rts line the ptt control.
When you hit alt+3 psk window will be up. with alt+s you can see some psk 
settings. Change the right one under tx (if needed)
there is nothing else needs a setup in dx4win. If you have checked these and 
psk is not working look for something in your trx or interface.
73 Kostas sv1dpi

----- Original Message ----- 
From: "David M. Monfried" <dmonfried at comcast.net>
To: <dx4win at mailman.qth.net>
Sent: Tuesday, January 12, 2010 4:36 PM
Subject: [Dx4win] PSK31 - how to transmit?


> Searched the archives but could not find the answer to this simple(?)
> problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN
> 7.05.04. I am able to decode signals, but can't figure out what I'm doing
> wrong on transmit. Here's the set-up:
>
>
>
> IC7800 + Navigator (in file/Preferences/Control, tried both Default Sound
> Card and Cards 0 and 1 in PSK Sound Card).
>
>
>
> Presently control radio via com port 7; tried Stop Radio and using com 
> port
> 7 ( PSK31 window/ Alt+S /TX/com 7, then tried PTT and VOX).  Nothing.
>
>
>
> Control SteppIr antenna via Remote jack on IC7800.
>
>
>
> Successfully use HRD with DM780 - but give up DX4WIN control of rig to HRD
> when I want to operate RTTY or PSK31.that's why I'd like to get the PSK31
> function going on DX4WIN.
>
>
>
> I assume I'm missing something elementary - a cable connection or software
> setting. If I have to add a PTT connection, I don't see where it would
> terminate on the radio.
>
>
>
> Any help would be much appreciated. Thank you.
>
>
>
> Dave, W2PK
>
>
>
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>