[Dx4win] Icom IC-7800 rig file

[ON4AOI]

Well Peter,
It looks not that simple.
I compared the cat commands from the original release and what is changed in
the new release
There are no new CI-V commands added 
Cmd 0F 00/01 is changed from split off/on to read split setting 00/01 =
off/on.

Cmd 1C is completely changed to what DX4WIN probably can to read the split
freq 
but the previous value-check for cmd 1C was never used in DX4WIN.
They were used to check if you were in RX/TX or to read the antenna tuner.
Think we have to wait after a solution from Paul 

Guy ON4AOI 
 

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Peter Bacon
> Verzonden: zondag 26 december 2010 13:48
> Aan: dx4win at mailman.qth.net
> Onderwerp: [Dx4win] Icom IC-7800 rig file
> 
> I see that Icom has updated the firmware for the IC-7800 to ver 2.30.
> The new firmware include the long awaited ability to read split
> frequencies.
> Has anyone figured out how to implement this in the DX4Win rig file/
> 73 Peter G3ZSS
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html