[Dx4win] Yaesu MkV

[Cliff Ahrens]

I have a Yaesu MK-V, and with v8.02 CAT does not correctly report the
frequencies with the radio set to MKV in preferences.  

When I set the radio in preferences to FT1000MP, then the CAT works
correctly with the MK-V, saving the transmit frequency in the QSO Frequency
field and a note RX=[RX frequency] in the Notes for this QSO.

Cliff K0CA   

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Paul van der Eijk
Sent: Monday, September 14, 2009 9:31 PM
To: DX4WIN Reflector
Subject: [Dx4win] Yaesu MkV

Hi,

Forwarding this message to the reflector for ON4CD

--Paul, KK4HD

I upgrade from 7.07 to 8.02 and the Cat doesnt work properly with my
YAESU MKV
In fact, the Freq. windows are properly filled with the main VFO A freq.
but the QSX freq. (when working split) are not
writed on "QSO note windows" despite the $$ on the notes windows of
contest mode.

(All of that stuff is working fine with the 7.07 release)

As well, if working split and making Announce DX, the windows
"Frequency" are properly filled with
the VFO A Freq. but the "QSX  frequency" windows still empty (0,00) !!

I try using FT 1000MP driver into radio preference instead of MKV and
that time, everything work but reversed ...
the Freq. windows show the split freq and the qso note ($$) show the
main frequency (VFO A) !!

Obviously, when using that configuration the Announce DX is correct,
both Frequency and QSX Frequency windows are properly filled with the
correct frequencies.

Someone have the same problem ?
I was back from the 8.01 to 7.07 and now back again from  8.02 to  7.07 ...
Ghis on4cd
______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html