[Dx4win] dx4winv.v 801

[Kjell W. Strom]

The MicroKeyer works fine here. It's using a K1EL Winkey chip
and the setting in Preferences>CW should be Winkey.

73,
Kjell, PB3SM - SM6CPI
 
 

> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net 
> [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of ON4AOI
> Sent: 03 September 2009 12:00
> To: dx4win at mailman.qth.net
> Subject: Re: [Dx4win] dx4winv.v 801
> 
> Not sure if the MicroHam keyer is working or not Because I 
> don´t have one but I think there are users That are using it 
> with dx4win. 
> I use a Winkeyer (K1EL chip) that is supported By DX4WIN but 
> the problem you have is related to The USB serial Port, I can 
> simulate the exception When I disconnect my keyer b4 shutting 
> down DX4WIN.
> Make sure when you setup this USB to serial port that All is
ok.
> 
> Guy ON4AOI 
> 
> > -----Oorspronkelijk bericht-----
> > Van: dx4win-bounces at mailman.qth.net [mailto:dx4win- 
> > bounces at mailman.qth.net] Namens Ian & Steph Fugler (G4IIY)
> > Verzonden: donderdag 3 september 2009 11:37
> > Aan: Ken Chandler; dx4win at mailman.qth.net
> > Onderwerp: Re: [Dx4win] dx4winv.v 801
> > 
> > i also have the microham keyer.  i cannot get it to send cw 
> thru D4W, 
> > although it works fine with N1MM.
> > 
> > 
> > ----- Original Message -----
> > From: "Ken Chandler" <g0orh at sky.com>
> > To: "'Ian & Steph Fugler (G4IIY)'" <ian.g4iiy at zen.co.uk>
> > Sent: Thursday, September 03, 2009 9:34 AM
> > Subject: RE: [Dx4win] dx4winv.v 801
> > 
> > 
> > > Yes, Have MicroHam keyer 2 um, that's why the cw won't
work on
> > dx4win, OK
> > > thanks I'll take a look see.
> > >
> > > Ken..G0ORH
> > >
> > > -----Original Message-----
> > > From: Ian & Steph Fugler (G4IIY)
[mailto:zen90387 at zen.co.uk]
> > > Sent: 03 September 2009 09:29
> > > To: Ken Chandler; dx4win at mailman.qth.net
> > > Subject: Re: [Dx4win] dx4winv.v 801
> > >
> > > I got that when I tried to set up the Com ports for CW 
> keying.  Have
> > you
> > > changed those?
> > >
> > > Ian
> > > ----- Original Message -----
> > > From: "Ken Chandler" <g0orh at sky.com>
> > > To: <dx4win at mailman.qth.net>
> > > Sent: Thursday, September 03, 2009 9:08 AM
> > > Subject: [Dx4win] dx4winv.v 801
> > >
> > >
> > >>I cannot close dx4win V80.1 I get an error up saying
an....an
> > exception
> > >> occurred, thread error (5)
> > >>
> > >>
> > >>
> > >> Any idea what's wrong!
> > >>
> > >>
> > >>
> > >> Ken..G0ORH
> > >>
> > >>
______________________________________________________________
> > >> Dx4win mailing list
> > >> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > >> Help: http://mailman.qth.net/mmfaq.htm
> > >> Post: mailto:Dx4win at mailman.qth.net
> > >>
> > >> This list hosted by: http://www.qsl.net Please help
support this 
> > >> email list: http://www.qsl.net/donate.html
> > >
> > 
> >
______________________________________________________________
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net Please help support 
> this email 
> > list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list:
http://www.qsl.net/donate.html
> 
>