[Dx4win] CQ DX Field Submittal

[Kostas Stamatis]

You must put an S only in Mixed mode
If you check once the mode and in the other qso the mixed both qsos are 
submitted
Kostas sv1dpi

----- Original Message ----- 
From: "Bud Governale, W3LL" <w3ll at arrl.net>
To: <dx4win at mailman.qth.net>
Sent: Friday, October 30, 2009 9:31 PM
Subject: [Dx4win] CQ DX Field Submittal


> I'm getting ready to do a CQ DX Field Submission using V8.02
> Since there are separate awards for Mixed, Phone, Digital and certain 
> selected bands, I put a check mark in Mixed, Band
> and Mode in the CQ Field Award choices.
>
> The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are 
> all ok with one entry for each grid.
>
> However, I now want to choose specific QSL's to make the submission 
> easier.
> If countries located within a single grid field are selected (identified 
> in the application literature) and they are
> confirmed by a national organization (such as LOTW) then a submitted QSL 
> is not required.
>
> Here's an example of my problem:
>
> Grid AG is only confirmed by two QSO's with ZL8R. One for 40M SSB and one 
> for 15M RTTY.
>
> In the ZL8R 40M SSB QSO window, in the CQFld column, I put an S 
> (submitted) in the Mode column (for SSB) and one S in
> the Band column (for 40M).
>
> In the ZL8R 15M RTTY QSO window, in the CQFld column, I put an S in the 
> Mixed column ( RTTY now adds a Mixed mode to the
> previous SSB QSO) and one in the Mode column (for RTTY).
>
> Problem: Now when I print out the mixed submission listing (selecting 
> award CQ DX Field, Checking only Mixed award,
> Selecting All Bands and All Modes) the printout has two entries for Grid 
> AG. One for SSB and one for RTTY QSO's. Only
> one entry should be listed for each of the Grids for the mixed mode 
> submission. In this case only the RTTY QSO should
> have been listed since it was the only one selected (S) for Mixed Mode.
>
> The above is just one example. I've done this for other grids that have 
> the similar QSO combinations. Now my Mixed
> submission printout has many duplicate grid confirmations in it.
>
> How am I supposed to accomplish this?
>
> 73,
>
> Bud W3LL
> w3ll at arrl.net
>
>
>
>
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>