[Dx4win] CQ DX Field Submittal

[Bud Governale, W3LL]

I'm getting ready to do a CQ DX Field Submission using V8.02
Since there are separate awards for Mixed, Phone, Digital and certain selected bands, I put a check mark in Mixed, Band
and Mode in the CQ Field Award choices.

The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are all ok with one entry for each grid.

However, I now want to choose specific QSL's to make the submission easier.
If countries located within a single grid field are selected (identified in the application literature) and they are
confirmed by a national organization (such as LOTW) then a submitted QSL is not required.

Here's an example of my problem:

Grid AG is only confirmed by two QSO's with ZL8R. One for 40M SSB and one for 15M RTTY.

In the ZL8R 40M SSB QSO window, in the CQFld column, I put an S (submitted) in the Mode column (for SSB) and one S in
the Band column (for 40M).

In the ZL8R 15M RTTY QSO window, in the CQFld column, I put an S in the Mixed column ( RTTY now adds a Mixed mode to the
previous SSB QSO) and one in the Mode column (for RTTY).

Problem: Now when I print out the mixed submission listing (selecting award CQ DX Field, Checking only Mixed award,
Selecting All Bands and All Modes) the printout has two entries for Grid AG. One for SSB and one for RTTY QSO's. Only
one entry should be listed for each of the Grids for the mixed mode submission. In this case only the RTTY QSO should
have been listed since it was the only one selected (S) for Mixed Mode.

The above is just one example. I've done this for other grids that have the similar QSO combinations. Now my Mixed
submission printout has many duplicate grid confirmations in it.

How am I supposed to accomplish this?

73,

Bud W3LL
w3ll at arrl.net