[Dx4win] rig control icom 706mk2g

[Joe Giacobello, K2XX]

In my 706MKIIG manual I have crossed out "4E" and written in "58."  I 
use 58 with 8.02 and it works.  I don't know where I picked up this 
info, but apparently there's an error in the 706 manual.

73, Joe
K2XX

Peter Archibald wrote:
> Have tried different combinations to get DX4WIN to work with 706MKIIG. After
> a minute or so, a window appears and say's radio timed out. Radio address
> now set to 4E and baud rate auto. Program now set to address 4e and baud
> rate to 19200. Have DX4WIN Version 8.02.
>
> Using a rigtalk from west mountain radio. Windows say's unit ok?
>
> Thanks;  Peter/W4ZGR
>
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>