[Dx4win] Fw: Printing addresses

[wo2n]

----- Original Message ----- 
From: "wo2n" <wo2n at arrl.net>
To: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
Cc: <dx4win at mailman.qth.net>
Sent: Monday, November 02, 2009 3:17 PM
Subject: Re: [Dx4win] Printing addresses


> Okay I get it.
> The Address is printed from the callsign in the mgr box.
> Choosing DIRECT doesn't prompt  printing an address label.
> I'll try it by typing the callsign of the mailing label call into mgr box.
> Tnx Jim, 73,de Bernie/WO2N.>
>
> ----- Original Message ----- 
> From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
> To: "wo2n" <wo2n at att.net>
> Cc: <dx4win at mailman.qth.net>
> Sent: Monday, November 02, 2009 2:20 PM
> Subject: Re: [Dx4win] Printing addresses
>
>
>> On Mon, Nov 2, 2009 at 11:57 AM, wo2n <wo2n at att.net> wrote:
>>
>>> Hi, I have a callsign that's in mgr addresses.
>>> If I have a QSO marked direct, why doesn't it print the address on a 
>>> label?
>>> It only prints the QSO, callsign, no ADDRESS!
>>> thanks for help, de Bernie/WO2N.>
>>> PS NOT using an outside source
>>
>> The QSL Manager field in the QSO window has to have the same callsign.
>> Then it should print.
>>
>> There should be a better way to do this!  Maybe DIRECT should bypass
>> the QSL manager field check.  I think the problem is that the QSL
>> method is independent of direct/manager the way you and I think of it
>> (since there is no *manager* QSL method).
>>
>> Paul...???
>>
>> - Jim
>>
>> -- 
>> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
>