[Dx4win] cw keying 8.03

[Mel]

Thought I had tried this before unsuccessfully, John. Maybe I was 
thinking of that other logging program I used for a while. Oh well...

In any case 8.03 seems to be working just fine using the COM port here. 
I'm using a standard COM port and Win XP.

I would suggest that Peter double check his settings and not assume the 
configuration from .02 was correctly copied to .03.

ON4AOI wrote:
> Mel this combo is working for a few years now
> Its not new
> 
> Guy
> 
>> -----Oorspronkelijk bericht-----
>> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
>> bounces at mailman.qth.net] Namens Mel
>> Verzonden: dinsdag 22 december 2009 2:52
>> Aan: Peter Archibald
>> CC: dx4win at mailman.qth.net
>> Onderwerp: Re: [Dx4win] cw keying 8.03
>>
>> Tried it here and it works fine. In fact I notice a major improvement.
>> You can now use the same COM port for radio control and CW. I use RTS
>> to
>> supply power to the interface and DTR to key the CW line. I believe
>> this
>> is new in Ver 8.03. This is going to be real handy with my laptop which
>> only has one COM port (which is one more than most ;-).
>>
>> Peter Archibald wrote:
>>> Jim:
>>>
>>> Using DX4WIN on com port. Same setup in 8.02, no problems.
>>>
>>> Peter/W4ZGR
>>> ______________________________________________________________
>>> Dx4win mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Dx4win at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
>