[Dx4win] cw keying 8.03

[ON4AOI]

Mel this combo is working for a few years now
Its not new

Guy

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Mel
> Verzonden: dinsdag 22 december 2009 2:52
> Aan: Peter Archibald
> CC: dx4win at mailman.qth.net
> Onderwerp: Re: [Dx4win] cw keying 8.03
> 
> Tried it here and it works fine. In fact I notice a major improvement.
> You can now use the same COM port for radio control and CW. I use RTS
> to
> supply power to the interface and DTR to key the CW line. I believe
> this
> is new in Ver 8.03. This is going to be real handy with my laptop which
> only has one COM port (which is one more than most ;-).
> 
> Peter Archibald wrote:
> > Jim:
> >
> > Using DX4WIN on com port. Same setup in 8.02, no problems.
> >
> > Peter/W4ZGR
> > ______________________________________________________________
> > Dx4win mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Dx4win at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html