[Dx4win] A strange thing

[Mel]

FWIW... I use my Microham interface like this... it can set up two 
virtual ports for CAT and works perfectly with my Icoms. I have had 
DX4Win and MixW or DX4Win and HRD working simultaneously with no 
problems at all.

ON4AOI wrote:
> Hi Tibor,
> Tried this out a few months ago before the bandmap was in DX4WIN.
> I used bandmaster from VE3NEA,DX4WiN and HRD to see if the VSPE
> Driver could handle it, I could make it working but very unstable,
> Saved configuration did not work correct after shutting down and restarting
> So everytime I had to reconfigure all, shortly after my tests the developing
> In dx4win has started......
> 
> Guy ON4AOI    
> 
>> -----Oorspronkelijk bericht-----
>> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
>> bounces at mailman.qth.net] Namens Tibor M. Blum - IK2SAI -
>> Verzonden: zondag 23 augustus 2009 11:56
>> Aan: dx4win at mailman.qth.net
>> Onderwerp: [Dx4win] A strange thing
>>
>> Hy guys.
>>
>> My set up is a TS2000X with CAT made via Ham Radio Deluxe.
>>
>> Connection Is made with a serial/USB converter @ 57600
>>
>> PC is an AMD Athlon @ 1 GHz, 640 RAM and Win XP sp3
>>
>>
>>
>> Of course if I try to connect DX4WIN to my radio, PC says that the com
>> is
>> busy.
>>
>> If I connect DX4WIN without running Ham Radio Deluxe, all is ok, band
>> map is
>> ok, no problem.
>>
>>
>>
>> Yesterday in a forum someone talked to me about Virtual Serial Ports
>> Emulator freeware software (VSPE).
>>
>> I immediately installed the software and after some minutes  I was able
>> to
>> create a virtual com where to address Dx4WIN AND HRD.
>>
>> Fantastic: when I receive a spot I click on that, it change me the
>> setting
>> of the radio, HRD show all the new parameters and in the Dx4WIN I get
>> the
>> call in the right place.
>>
>> All works ok.BUT:
>>
>> Looking at the band map, it flickers: the vertical, qrg line moves from
>> left
>> to right and than again right to left.
>>
>> The frequency showed on the top of band map start from the right one
>> and
>> step by step goes down..down..down to zero.without moving the real QRG
>> on
>> the radio.
>>
>> On the QSO input window, the same happen in the frequency display. But
>> even
>> the mode and the band are changing step by step without sense.
>>
>> I tried to set the radio on 18140 SSB, on the band map the frequency
>> starts
>> to move down. In the QSO window problem is that the mode changes to CW,
>> and
>> so on and even the qrg moves. If I log the "qso" dx4win doesn't get the
>> real
>> data but what is displaying at that time.
>>
>>
>>
>> I have tried to reduce the com speed down to 9600 but nothing has
>> changed.
>>
>>
>>
>> So I returned to my old setting.but there is any way to fix the
>> problem?
>>
>>
>>
>> HRD + DX4WIN are just the best of the two worlds and being able to run
>> them
>> connected to the radio is certainly fantastic.
>>
>>
>>
>> Tibor, IK2SAI
>>
>>
>>
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>