[Dx4win] A strange thing

[ON4AOI]

Hi Tibor,
Tried this out a few months ago before the bandmap was in DX4WIN.
I used bandmaster from VE3NEA,DX4WiN and HRD to see if the VSPE
Driver could handle it, I could make it working but very unstable,
Saved configuration did not work correct after shutting down and restarting
So everytime I had to reconfigure all, shortly after my tests the developing
In dx4win has started......

Guy ON4AOI    

> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] Namens Tibor M. Blum - IK2SAI -
> Verzonden: zondag 23 augustus 2009 11:56
> Aan: dx4win at mailman.qth.net
> Onderwerp: [Dx4win] A strange thing
> 
> Hy guys.
> 
> My set up is a TS2000X with CAT made via Ham Radio Deluxe.
> 
> Connection Is made with a serial/USB converter @ 57600
> 
> PC is an AMD Athlon @ 1 GHz, 640 RAM and Win XP sp3
> 
> 
> 
> Of course if I try to connect DX4WIN to my radio, PC says that the com
> is
> busy.
> 
> If I connect DX4WIN without running Ham Radio Deluxe, all is ok, band
> map is
> ok, no problem.
> 
> 
> 
> Yesterday in a forum someone talked to me about Virtual Serial Ports
> Emulator freeware software (VSPE).
> 
> I immediately installed the software and after some minutes  I was able
> to
> create a virtual com where to address Dx4WIN AND HRD.
> 
> Fantastic: when I receive a spot I click on that, it change me the
> setting
> of the radio, HRD show all the new parameters and in the Dx4WIN I get
> the
> call in the right place.
> 
> All works ok.BUT:
> 
> Looking at the band map, it flickers: the vertical, qrg line moves from
> left
> to right and than again right to left.
> 
> The frequency showed on the top of band map start from the right one
> and
> step by step goes down..down..down to zero.without moving the real QRG
> on
> the radio.
> 
> On the QSO input window, the same happen in the frequency display. But
> even
> the mode and the band are changing step by step without sense.
> 
> I tried to set the radio on 18140 SSB, on the band map the frequency
> starts
> to move down. In the QSO window problem is that the mode changes to CW,
> and
> so on and even the qrg moves. If I log the "qso" dx4win doesn't get the
> real
> data but what is displaying at that time.
> 
> 
> 
> I have tried to reduce the com speed down to 9600 but nothing has
> changed.
> 
> 
> 
> So I returned to my old setting.but there is any way to fix the
> problem?
> 
> 
> 
> HRD + DX4WIN are just the best of the two worlds and being able to run
> them
> connected to the radio is certainly fantastic.
> 
> 
> 
> Tibor, IK2SAI
> 
> 
> 
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html