[Dx4win] USV to CIV

[Mel]

No thanks Kostas. It is fairly obvious from your response and others I 
have corresponded with at length that these cheap Chinese interfaces 
sold on eBay do NOT work properly... they are introducing errors and 
relying on error correction in the programs to make them work after a 
fashion.

Kostas SV1DPI wrote:
> Mel i have bought one usb to ci-v from ebay for my ic910. The cost was 
> something like 10-15$. it works fb with other programs but i had 
> problems with dx4win. d4w reads strange frequencies. As i read recently 
> the problem exists with others. But i have not tried the solutions. 
> Maybe i can find my supplier if you are interesting. Kostas sv1dpi
> 
> ----- Original Message ----- From: "Mel" <ve2dc at videotron.ca>
> To: "DX4WIN" <dx4win at mailman.qth.net>
> Sent: Friday, August 21, 2009 12:14 AM
> Subject: [Dx4win] USV to CIV
> 
> 
>> Are there any converters from USB directly to CI-V recommended. I
>> already have a USB-RS232 and a RS232 to CI-V... but I would like to
>> simplify the cabling. I see some advertised on ebay very inexpensively
>> but considering some members experiences I am pretty sure some don't
>> work very well. Are there any that work other than the Rigtalk which is
>> a bit pricey at $60.
>>
>> Mel, VE2DC
>> ______________________________________________________________
>> Dx4win mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Dx4win at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> 
>