[Dx4win] ADIF to DX4WIN log conversion version 3.1

[ON4AOI]

Kostas,
What you are trying to do will probably never work with comportemulation,
I used to work with comportemulator b4 mmtty was supported by DX4WIN
The connection between mmtty and dx4win was with 2 virtual comports
And the reel connection to the radio was with a existing comport

In short only one program was communicating with the radio
In a serial string it could work but not both in parallel.

This was on my webpage years ago how to setup, but after mmtty was supported
I removed it, probably in one of my backups I will find it


Guy ON4AOI
  
 

-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens Kostas SV1DPI
Verzonden: woensdag 17 december 2008 11:57
Aan: REFLECTOR dx4win
Onderwerp: Re: [Dx4win] ADIF to DX4WIN log conversion version 3.1

I would like to have a band map also. When you sort the spots you will see 
many spots for the same station and you have not an easy way to check all 
the band. It helps just to know what a station is when you listen a qso or a

pileup. By the way ve3nea sells a program called band master. The bad news 
are that it needs to have radio control and there is no way (?) both 
programs band master and dx4win have radio control over the same port. 
ve3nea gives omnirig for free to make the trick but dx4win doesn't support 
it. Maybe the only way is a program which gives virtual com ports. So this 
way you must setup dx4win to see vitual com port 8 and band master to see 
virtual port 7.  then we will have Virtual ports 7 and 8 to be directed to 
port 1 where the radio is connected. The problem is that i have not found a 
free program to do it that really works without other problems. Anyone who 
have tried one and it is free? I can find some of them in internet but the 
first one i had tried, messed my com ports after installed
Kostas sv1dpi

----- Original Message ----- 
From: "Rick Craig" <rick.craig at n6nd.com>
To: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>; "Bill NY9H" <ny9h at arrl.net>
Cc: "DX4WIN" <dx4win at mailman.qth.net>
Sent: Wednesday, December 17, 2008 3:28 AM
Subject: Re: [Dx4win] ADIF to DX4WIN log conversion version 3.1


> No, not even close....
>
> Rick, N6ND
>
> At 12:40 PM 12/16/2008, Jim Reisert AD1C wrote:
>>If you sort the DX Spots window by frequency, you essentially have a
>>Band Map, no?
>>
>>73 - Jim AD1C
>>
>>On Tue, Dec 16, 2008 at 1:08 PM, Bill NY9H <ny9h at arrl.net> wrote:
>>
>> > Not being a contester.... the only thing I'd like to see added is a 
>> > band
>> > map.  I use other programs , but would be nice to have integrated 
>> > within.
>>
>>--
>>Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us
>>"Let Not Mankind Bogart Love" - Willie Nelson
>>_______________________________________________
>>Dx4win mailing list
>>Dx4win at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/dx4win
>
> n6nd at arrl dot net
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
> 


_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win