[Dx4win] DX4WIN version 70702

[Andreas Junge, N6NU]

Dusty,

you have to change the radio to "Elecraft K3 X4" in the preferences. My K3
works just fine with it, including band+mode changes including split.

73,

Andreas, N6NU

> -----Original Message-----
> From: Dusty Chapman [mailto:k3wc at verizon.net]
> Sent: Tuesday, December 16, 2008 3:38 PM
> To: Andreas Junge, N6NU; 'Jim Reisert AD1C'; 'DX4WIN Reflector'
> Subject: Re: [Dx4win] DX4WIN version 70702
> 
> Hello DX4WIN Guru's,
>     It has rained on the parade.  K3 won't do any more in 7.07 than it did
> with 7.05.  When I double click on a spot that has a QSX frequency, it
> changes both VFO's to where they belong, but it does not change the mode
> on
> VFO B and it does not bring up "Split".  It does make "Split" blink, but
> it
> doesn't hold.  I am using the latest firmware for the K3 and I also tried
> DX4WIN 7.06 with the same results.  Is there some "Menu" or "Config"
> setting
> in the K3 or in DX4WIN that I am not aware of?
> Thanks,
> Dusty - K3WC
> 
> ----- Original Message -----
> From: "Andreas Junge, N6NU" <n6nu at arrl.net>
> To: "'Jim Reisert AD1C'" <jjreisert at alum.mit.edu>; "'DX4WIN Reflector'"
> <dx4win at mailman.qth.net>
> Sent: Monday, December 15, 2008 11:25 PM
> Subject: RE: [Dx4win] DX4WIN version 70702
> 
> 
> Jim,
> 
> Radio: Is the "Elcraft K3 x4" a new driver? I tested it and it does SPLIT
> as
> well as band changes while also changing the mode. So far so good :-)
> 
> Mailed Cutoff: still "steals" countries. After a "M" times out it does not
> revert to "W", therefore making the worked country disappear in the DXCC
> reports. The field appears "blank" and not "W" as expected and it will not
> be counted.
> 
> Thanks,
> 
> Andreas, N6NU
> 
> -----Original Message-----
> From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu]
> Sent: Monday, December 15, 2008 4:43 PM
> To: DX4WIN Reflector
> Subject: Re: [Dx4win] DX4WIN version 70702
> 
> Now that Paul has released the radio fix, if you were having radio
> control problems before, and are *still* having radio control problems
> with 7.07, please let Paul or the reflector know.  He can't possibly
> own and test every radio with DX4WIN personally.
> 
> And of course, the same goes if you were NOT having problems before,
> but are now...
> 
> 73 - Jim AD1C
> 
> On Sun, Dec 14, 2008 at 5:00 PM, Paul van der Eijk <pvandereijk at cox.net>
> wrote:
> > Hi,
> >
> > Version 707 of DX4WIN is available for download.
> >
> > This version corrects the problem introduced in 7.06 for all radios to
> > change the sequence for send mode and frequency to the radio.
> >
> > --73, Paul, KK4HD
> 
> --
> Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us
> "Let Not Mankind Bogart Love" - Willie Nelson
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
> 
> --------------------------------------------------------------------------
> ------
> 
> 
> 
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.9.18/1850 - Release Date:
> 12/15/2008
> 5:04 PM