[Dx4win] Freq doesn't change properly when clicking a spot.

[Louis Dietrich]

Guy and Walt,

 

The problem does not appear to be in the rig files....and slowing the
command processing doesn’t appear to be the cure. I have tried to use delays
in the file for the Yaesu FT9000/ 2000 ....and everything works in 7.05.

 

In the Yaesu series of radios, there is a menu FRQDISP...by changing it to
‘DIR’, the 7.06 problem disappeared. (Thanks John, W9ROM) Is there a similar
Menu item in ICOM...at least, you can fix the problem as Paul figures out
what happened in 7.06.

 

By fixing the Omni VII and K3, we seem to have “broken” the other rigs’ CAT.
The FT2000 and 9000 have very quick processors and can handle the
commands...so the problem is probably elsewhere. 

 

BTW, for anyone interested, I have a new rig file for the updated FT9000 PEP
rigs...if you need it, please contact me off the reflector...

 

73,

 

Lou N2TU

 

 

 

 

 

  _____  

From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of ON4AOI
Sent: Thursday, December 11, 2008 2:33 PM
To: k2waltk at gmail.com
Cc: dx4win at mailman.qth.net
Subject: RE: [Dx4win] Freq doesn't change properly when clicking a spot.

 

Hi all,

 

Yes the CAT part of the program is changed , Paul and I spend much time in
solving the problem 

For the OMNIVII rig and the K3 rig, but didn´t found or have any problems
with my IC7800.

 

 

If you are aware how to change a rigfile via the radio database (closed log
)

 you can try to give a little delay (100ms) next to the command line for  

 

set vfo A or 

set vfo B or 

set mode or

set mode B  

 

make sure you make a backup of the rigfile first
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

In the omniVII file we had to put a 100ms delay in one cmdline because the
radio 

couldn´t process the correct sended commands.

 

Guy ON4AOI   

 

Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens k2waltk at gmail.com
Verzonden: donderdag 11 december 2008 18:21
Aan: dx4win at mailman.qth.net
Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot.

 

Hey all,

 

Version:   DX4Win 7.06.02

Rig:           IC756 Pro III

 

If I am on CW and I grab an SSB spot, the frequency I’m taken too is

offset (low) from the actual frequency by the amount of the offset

I use on CW. A second double click on the spot corrects this anomaly.

 

Any ideas as to what is causing this problem?  Previous versions, 

i.e. dx4win7.05 didn’t exhibit this behavior.

 

 

                 Regards,

 

                            Walt Kornienko - K2WK

                            Gordonsville, VA 22942-6110
                            k2waltk at gmail.com

                            k2wk at arrl.net

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/dx4win/attachments/20081211/e356e597/attachment.htm