[Dx4win] Freq doesn't change properly when clicking a spot.

[ON4AOI]

Hi all,

 

Yes the CAT part of the program is changed , Paul and I spend much time in
solving the problem 

For the OMNIVII rig and the K3 rig, but didn´t found or have any problems
with my IC7800.

 

 

If you are aware how to change a rigfile via the radio database (closed log
)

 you can try to give a little delay (100ms) next to the command line for  

 

set vfo A or 

set vfo B or 

set mode or

set mode B  

 

make sure you make a backup of the rigfile first
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

In the omniVII file we had to put a 100ms delay in one cmdline because the
radio 

couldn´t process the correct sended commands.

 

Guy ON4AOI   

 

Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens k2waltk at gmail.com
Verzonden: donderdag 11 december 2008 18:21
Aan: dx4win at mailman.qth.net
Onderwerp: [Dx4win] Freq doesn't change properly when clicking a spot.

 

Hey all,

 

Version:   DX4Win 7.06.02

Rig:           IC756 Pro III

 

If I am on CW and I grab an SSB spot, the frequency I’m taken too is

offset (low) from the actual frequency by the amount of the offset

I use on CW. A second double click on the spot corrects this anomaly.

 

Any ideas as to what is causing this problem?  Previous versions, 

i.e. dx4win7.05 didn’t exhibit this behavior.

 

 

                 Regards,



 

                            Walt Kornienko - K2WK

                            Gordonsville, VA 22942-6110
                            k2waltk at gmail.com

                            k2wk at arrl.net



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/dx4win/attachments/20081211/205abc92/attachment.htm