[Dx4win] Freq doesn't change properly when clicking a spot.

[Kjell W. Strom]

Hello,

Same thing with FT-1000D here. I have CW display offset set to
400 Hz, i.e. when I listen to a CW signal with 400 Hz pitch, the
display shows his true frequency. But now DX4WIN sends me 400 Hz
HIGHER than that the first time I click.

with a second click I arrive at the correct frequency for the
spotted station. But if I next click once on an SSB spot, the
radio is sent to a frequency which is 400 Hz LOWER than the
spotted frequency. Again, a second click sets the radio to the
actual spot frequency.

73 de
Kjell, PB3SM - SM6CPI
 


> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net 
> [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Louis
Dietrich
> Sent: 11 December 2008 19:51
> To: 'Jim Reisert AD1C'; k2waltk at gmail.com
> Cc: dx4win at mailman.qth.net
> Subject: RE: [Dx4win] Freq doesn't change properly when 
> clicking a spot.
> 
> Jim,
> 
> I posted this a few days ago....It was in regard to my FT2000 
> and FT 9000...
> 
> "DX4Winers,
> and Paul
> 
> I am experiencing some problems with the latest version...
> 
> Using identical rig files, as we used in 7.05.03 , here's 
> what is happening in 7.06.02.
> 
> 1.     If the rig is on SSB and I click on a CW spot, say 
> 7044, the rig goes
> to 7044.7. If I click on the same spot again, the rig shows
7044...
> 2.     If I then click on another CW spot, the rig goes to the
correct
> frequency.
> 3.     If I then click on a SSB spot 14185 (Rig still on CW), 
> the rig goes
> to 14184.3. If I click on the same spot, the frequency read
14185... 
> 
> Something has changed in the latest version of DX4WIN....
> 
> I have switched back and forth between the versions...and 
> have the same rig files in both....
> 
> Can anyone else verify the above?"....
> 
> Sounds like a similar problem....there is definitely 
> something different in the latest version....I cleared my 
> problem by changing the offset frequency in both rigs, which 
> is the first time I ever had to do that...
> 
> 73
> 
> Lou N2TU
> 
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net 
> [mailto:dx4win-bounces at mailman.qth.net]
> On Behalf Of Jim Reisert AD1C
> Sent: Thursday, December 11, 2008 1:01 PM
> To: k2waltk at gmail.com
> Cc: dx4win at mailman.qth.net
> Subject: Re: [Dx4win] Freq doesn't change properly when 
> clicking a spot.
> 
> Hi Walt,
> 
> I don't understand this part:
> 
> > If I am on CW and I grab an SSB spot, the frequency I'm
taken to is 
> > offset (low) from the actual frequency by the amount of the
offset
> 
> Amount of "what" offset?
> 
> There are two Pro III .RIG files, try both and see if the 
> problem changes/goes away.  The "B" flavor doesn't work with
my rig.
> 
> I have a Pro III at home, I can try this tonight.
> 
> 73 - Jim AD1C
> 
> 2008/12/11  <k2waltk at gmail.com>:
> 
> > Hey all,
> >
> > Version:   DX4Win 7.06.02
> > Rig:           IC756 Pro III
> >
> > If I am on CW and I grab an SSB spot, the frequency I'm 
> taken too is 
> > offset (low) from the actual frequency by the amount of the 
> offset I 
> > use on CW. A second double click on the spot corrects this
anomaly.
> >
> > Any ideas as to what is causing this problem?  Previous 
> versions, i.e. 
> > dx4win7.05 didn't exhibit this behavior.
> 
> 
> --
> Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, 
> http://www.ad1c.us "Let Not Mankind Bogart Love" - Willie 
> Nelson _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
>