[Dx4win] Freq doesn't change properly when clicking a spot.

[Louis Dietrich]

Jim,

I posted this a few days ago....It was in regard to my FT2000 and FT 9000...

"DX4Winers,
and Paul

I am experiencing some problems with the latest version...

Using identical rig files, as we used in 7.05.03 , here's what is happening
in 7.06.02.

1.     If the rig is on SSB and I click on a CW spot, say 7044, the rig goes
to 7044.7. If I click on the same spot again, the rig shows 7044...
2.     If I then click on another CW spot, the rig goes to the correct
frequency.
3.     If I then click on a SSB spot 14185 (Rig still on CW), the rig goes
to 14184.3. If I click on the same spot, the frequency read 14185... 

Something has changed in the latest version of DX4WIN....

I have switched back and forth between the versions...and have the same rig
files in both....

Can anyone else verify the above?"....

Sounds like a similar problem....there is definitely something different in
the latest version....I cleared my problem by changing the offset frequency
in both rigs, which is the first time I ever had to do that...

73

Lou N2TU

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Thursday, December 11, 2008 1:01 PM
To: k2waltk at gmail.com
Cc: dx4win at mailman.qth.net
Subject: Re: [Dx4win] Freq doesn't change properly when clicking a spot.

Hi Walt,

I don't understand this part:

> If I am on CW and I grab an SSB spot, the frequency I'm taken to is
> offset (low) from the actual frequency by the amount of the offset

Amount of "what" offset?

There are two Pro III .RIG files, try both and see if the problem
changes/goes away.  The "B" flavor doesn't work with my rig.

I have a Pro III at home, I can try this tonight.

73 - Jim AD1C

2008/12/11  <k2waltk at gmail.com>:

> Hey all,
>
> Version:   DX4Win 7.06.02
> Rig:           IC756 Pro III
>
> If I am on CW and I grab an SSB spot, the frequency I'm taken too is
> offset (low) from the actual frequency by the amount of the offset
> I use on CW. A second double click on the spot corrects this anomaly.
>
> Any ideas as to what is causing this problem?  Previous versions,
> i.e. dx4win7.05 didn't exhibit this behavior.


-- 
Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us
"Let Not Mankind Bogart Love" - Willie Nelson
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win