[Dx4win] DX4WIN Version 7.06 and the FT2000 and FT9000

[Louis Dietrich]

All,

Thanks to John, W9RPM!...He told me to change the CW Freq Display Menu 055
on the FT9000 and menu 061 on the FT2000D to "direct"...

This seems to clear up my problem...but it is only in Version 7.06 where
I've experienced this...

So maybe the above will help some of the 2000/9000 users...

Again, Thanks John!

73

Lou N2TU




-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Louis Dietrich
Sent: Monday, December 08, 2008 5:02 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] DX4WIN Version 7.06 and the FT2000 and FT9000

DX4Winers,
and Paul

I am experiencing some problems with the latest version...

Using identical rig files, as we used in 7.05.03 , here's what is happening
in 7.06.02.

1.     If the rig is on SSB and I click on a CW spot, say 7044, the rig goes
to 7044.7. If I click on the same spot again, the rig shows 7044...
2.     If I then click on another CW spot, the rig goes to the correct
frequency.
3.     If I then click on a SSB spot 14185 (Rig still on CW), the rig goes
to 14184.3. If I click on the same spot, the frequency read 14185... 

Something has changed in the latest version of DX4WIN....

I have switched back and forth between the versions...and have the same rig
files in both....

Can anyone else verify the above?

73

Lou N2TU


_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win