[Dx4win] Label error

[Cliff Ahrens]

Hi Bill.  I use the Dymo 400 Turbo with DX4WIN 7.02 running under WinXP Pro
SP2, and print labels without receiving any warning message.  I'm not sure
what's the difference between my setup and yours, except that I'm running XP
Pro instead of W2K.  Here's the link to an app note which AD1C put on his
web page showing my setup for the Dymo 400 Turbo, using #30334 labels.

http://dx4win.ad1c.us/appnotes/nr3.htm

Good luck and hope you can find what's causing the problem.

73, Cliff, K0CA

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Bill Salyers
Sent: Friday, March 09, 2007 9:50 AM
To: DX4WIN MailingList
Subject: [Dx4win] Label error


DX4WIN users... I have a minor problem that is most likely operator error,
but I am stumped.
 
I have a new PC that I installed 7.02 on. I merged the ini file from my 7.01
installation and brought the database over. That all is fine and is working
as it should. However, I tried to print labels to my Dymo 400 (as I had been
for the past 8 months) and I get the following:
 
Warning: Not able to set Custom Paper size.
 
I have it configured correctly for the width,height, # across etc. and I was
set to Expert mode when I did it. I shutdown the 
program and started it up. I also rebooted, just to see if Windows 2000 had
something to do with it. (I have the same opsys on the old PC) I am able to
print to the printer from Word and the Dymo app itself.
 
Any thoughts would be appreciated.
 
73 and GuDx
 
aj8b => Bill_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win