[Dx4win] winkey2 support

[Alan Sewell]

I don't ever use my Winkey2 with DX4WIN but just checked it and it seems to work OK.  I'm running DX4WIN 7.02.15.  My virtual com port is set up as Com8.

Alan  N5NA



Pete Smith wrote:
> I'm having the same problem.  Just switched to 7.02.15, which I upgraded to from 6.03, largely because of Winkey support.  It appears, however, that DX4WIN can't address the virtual serial ports created by the USB driver.  I have set up COM7 for Winkey, but get no indication that they are communicating with each other.  When I monitor the port, there is no indication of any data flow from DX4WIN to the Winkey.
>
> Can anyone confirm if this is a known limitation of the current release of DX4WIN?  The virtual serial ports seem to work fine for rig control (using a MK2R+, which has an embedded Winkey 2). 
>
> 73, Pete N4ZR
>
> At 04:32 PM 1/22/2007, Mark wrote:
>   
>> I've had some problems with using my new WINKEY2 (USB) with DX4WIN.
>> (works ok with the WINKEYER2)
>>
>> Would like to hear from someone who has been successful in using this. (and if
>> it's possible to key alternate rigs using it within DX4WIN)
>>
>> Mark n2qt
>>
>>