[Dx4win] winkey2 support

[Pete Smith]

I'm having the same problem.  Just switched to 7.02.15, which I upgraded to from 6.03, largely because of Winkey support.  It appears, however, that DX4WIN can't address the virtual serial ports created by the USB driver.  I have set up COM7 for Winkey, but get no indication that they are communicating with each other.  When I monitor the port, there is no indication of any data flow from DX4WIN to the Winkey.

Can anyone confirm if this is a known limitation of the current release of DX4WIN?  The virtual serial ports seem to work fine for rig control (using a MK2R+, which has an embedded Winkey 2). 

73, Pete N4ZR

At 04:32 PM 1/22/2007, Mark wrote:
>I've had some problems with using my new WINKEY2 (USB) with DX4WIN.
>(works ok with the WINKEYER2)
>
>Would like to hear from someone who has been successful in using this. (and if
>it's possible to key alternate rigs using it within DX4WIN)
>
>Mark n2qt
>
>
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win