[Dx4win] Narrow filter problem (IC-756 Pro III)

[Larry Gauthier (K8UT)]

Using Notepad, open "\RADIOS\ICOM 756 Pro.rig" and make the following change
under the heading [RC-Set Mode]:

DEFAULT - invokes filter 2:
    CSTR=060002FD

For filter 1:
    CSTR=060001FD

For filter 3:
    CSTR=060003FD

-larry
K8UT
----- Original Message ----- 
From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
To: "Art - W6KY" <art-w6ky at sbcglobal.net>
Cc: <dx4win at mailman.qth.net>
Sent: Tuesday, February 06, 2007 16:09
Subject: Re: [Dx4win] Narrow filter problem (IC-756 Pro III)


I agree this would be a nice feature to have.

However, I'm pretty sure you can edit the filter width in the .RIG file. 
Just
don't ask me how.  But if someone wants to do the work of creating
wide/med/narrow .RIG files, I can post them on my web site.

73 - Jim AD1C

--- Art - W6KY <art-w6ky at sbcglobal.net> wrote:

> I have also had the same problem with ALL versions of
> DX4WIN with my IC-756PRO..  It would be nice if we
> could select the filter we want DX4WIN to set or not
> set on band change.
> Under file|radio there is no option to set filter.
> Just  Selects narrow filter for CW/SSB  in the window,
> which it doesn't do. My DSP narrow filter is set to
> 250hz, medium 500hz and wide 700hz. DX4WIN sets 500hz
> every time..Not able to change it in
> DX4WIN....Personally, I would rather set my filter by
> hand or have a DX4WIN F-key to cycle thru the filters.
> Not preset! Band condx/QRM/QRN are going to dictate
> filter selection.
> 73, Art  W6KY


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win