[Dx4win] Narrow filter problem (IC-756 Pro III)

[Art - W6KY]

I have also had the same problem with ALL versions of
DX4WIN with my IC-756PRO..  It would be nice if we
could select the filter we want DX4WIN to set or not
set on band change.
Under file|radio there is no option to set filter.
Just  Selects narrow filter for CW/SSB  in the window,
which it doesn't do. My DSP narrow filter is set to 
250hz, medium 500hz and wide 700hz. DX4WIN sets 500hz
every time..Not able to change it in
DX4WIN....Personally, I would rather set my filter by
hand or have a DX4WIN F-key to cycle thru the filters.
Not preset! Band condx/QRM/QRN are going to dictate
filter selection.
73, Art  W6KY 


--- Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:

> Please reply to reflector or Mikhail directly...
> 
> 
> Date: Mon, 5 Feb 2007 19:38:58 +0300
> From: Mikhail Bondarev <rl3bm at rl3bm.ru>
> Reply-To: Mikhail Bondarev <rl3bm at rl3bm.ru>
> To: jjreisert at alum.mit.edu
> Subject: narrow filter problem
> 
> Operating CW on 80m and 160m, I like 250Hz filter on
> my IC-756pro3.
> But if I do "grab spot and set radio" on dx cluster
> window, my pro3
> always switched from 250Hz to 500Hz filter and I
> have to select 250Hz
> back by hand. I don't have such problem with
> WriteLog. Any ideas?
> 
> Regards, Mike RL3BM
> DX4WIN 7.02.15
> 
> -- 
> Jim Reisert AD1C, 7 Charlemont Court, North
> Chelmsford, MA 01863
> USA +978-251-9933, <jjreisert at alum.mit.edu>,
> http://www.ad1c.us
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>