[Dx4win] 756 ProIII and RigTalk USB interface

[Jim Reisert AD1C]

At 10:52 PM 10/30/2006, Rick Stoneking wrote:

>I am trying to get Dx4Win 7.02 to talk to my ProIII using a RigTalk 
>interface.  The interface works perfectly with Writelog and 
>Commander 5.8.7.  In DX4WIN it will not get the information from the 
>radio regarding frequency/mode.  I read a previous post about DX4WIN 
>defaulting to 1200 baud and I went into my preferences, deselected 
>the Default box, the baud rate was already set to 9600 which is what 
>the ProIII is set to.  The address is the default 6e.
>
>Does anyone have a ProIII working with 7.02 using the Westmountain 
>Radio RigTalk USB to CIV interface?

Two things to check:

1.  In your DX4WIN radio preferences, try turning on the DTR and/or 
RTS boxes on.

2.  Check your radio's TRANSCEIVE setting.  It shoud be in the OTHERS 
menu.  If it's NOT transceive, enable it.  See if that makes a difference.

73 - Jim AD1C


-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us