[Dx4win] OOPS!!! Disregard Previous From Me WAS:Problem with Maximum QSOs

[Mike Rhodes]

Sorry. Didn't read your previous posts close enough.


Mike
*****************
Mike Rhodes wrote:

>
> File; Databases; Labels
> MAx QSOs Window
>
> Mike / W8DN
>
> *****************
>
> Cliff Ahrens wrote:
>
>> Steve, thanks for testing it.  It's not a "print group names" issue, 
>> because
>> I did not have that selected.  I must have something configured 
>> incorrectly.
>> Dick K7VC sent me his custom label file, which prints more than 3 labels
>> with no trouble.  I set up a new custom label with the exact same
>> configuration which works for Dick, and it still only prints 3 Q's per
>> label.  That made me think it was a printer configuration issue, but the
>> problem is present on both my inkjet and label printers.  At this 
>> point, I'm
>> not sure where to look, but I'll keep checking.  If I come up with a 
>> "fix"
>> I'll post it on the reflector.  Thanks again.
>>
>> Cliff  K0CA
>>
>> -----Original Message-----
>> From: Steve Bookout [mailto:steve at dx4win.com] Sent: Thursday, 
>> February 02, 2006 7:14 PM
>> To: Cliff Ahrens; dx4win at mailman.qth.net
>> Cc: 'KK4HD'; 'NR4M'
>> Subject: Re: Problem with Maximum QSOs Limited to 3 on a Custom Label
>>
>>
>> Hello Cliff,
>>
>> I just tried it here by copying one of the very tall label formats to 
>> 'custom1'.
>> I knew I had loads of CN8WW contacts from older contests so I did a 
>> search and found 22 of them.  Set the print flags and printed them.  
>> I got 10 to a label!
>>
>> One thing to remember, if you have the option of 'printing 'roup 
>> names' on the labels, it will only print QSO's belonging to the same 
>> group on the same label.  I tried it after invoking that option and 
>> only got max of 6 to a label (Worked them all bands in multiple 
>> contests.)
>>
>> So, seems to be working here.
>>
>> 73 de Steve, NR4M
>>
>>  At 05:51 PM 2/2/2006, Cliff Ahrens wrote:
>>  
>>
>>> Is anyone able to print more than 3 QSO's on a custom label in DX4WIN
>>> 7.01?  I'm printing a custom label which is designed with a label 
>>> height with room for 5 QSO's on a Dymo 400 Turbo Labelwriter.  With 
>>> the font, and font size selected, the label has room for 5 QSOs plus 
>>> the greeting line at the bottom.  With max QSOs set to "0" as 
>>> instructed, the greeting line prints OK on the bottom of the label, 
>>> and there is plenty of blank space for 5 QSO lines, but only 3 print 
>>> per label.  The preview of the label in edit mode with "sample" QSO 
>>> information ("Callsign 1" etc) shows 5 QSOs fitting on the label.  
>>> But the preview of the actual QSO infomation as well as the printout 
>>> is limited to 3 Q's, with blank space for more.
>>>
>>> I've tried changing the "Max QSOs" from 0 to 5 and even greater, and 
>>> still
>>> only 3 print per label.  I've also tried changing the fonts and font 
>>> sizes, with no luck.  I also tried a different custom label with 
>>> even greater label height which would allow more than 12 QSOs per 
>>> label.  On the preview, it showed more than 12 QSOs per label, but 
>>> again, the actual printout was limited to 3 per label.
>>>
>>> Anyone run into this issue?  Paul, Steve, or anyone on the 
>>> reflector, any
>>> suggestions?  Thanks!
>>>
>>> Cliff  K0CA
>>>
>>>
>>>   
>>
>>
>>
>> 73 de Steve, NR4M
>>
>> Rapidan Data Systems
>> steve at dx4win.com
>>
>> "DX4WIN... the way logging software should be"
>>
>> Free demo at www.dx4win.com
>>
>> *** PLEASE NOTE NEW EMAIL ADDRESS ***
>>
>> The old EROLS.COM address will be discontinued 
>>
>>
>>  
>>
>
>