[Dx4win] Saving frequency in log

[Jim Reisert AD1C]

It sounds like a polling problem.  I never had the problem when I had a real
serial COM port, but only since using the microHam device.

- Jim

--- Tony Lord <tony.lord at lfpuk.co.uk> wrote:

> Hi Jim
> 
> I don't use a microham microKeyer, but I have the same radio as you, well
> actually the 756 Pro II. I have numerous devices connected to my Pro II,
> homebrew digital modes unit, ARSWIN rotator control, Band Decoder, amp etc
> etc.........
> 
> Sounds like we'll have to leave it to Paul, its not a major issue because at
> least the stored frequency is NOT garbage its understandable.
> 
> 73's Tony G8DQZ
> 
> 
> -----Original Message-----
> From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu] 
> Sent: 14 August 2006 17:47
> To: Tony Lord; dx4win at mailman.qth.net
> Subject: Re: [Dx4win] Saving frequency in log
> 
> --- Tony Lord <tony.lord at lfpuk.co.uk> wrote:
> 
> > I use the $$ function to save the transmit frequency in my log when making
> > calls. Every now and then DX4WIN saves the frequency incorrectly. For
> > example a recent call on 20m it saved the frequency as 1,423,700MHz rather
> > than 14,237.00 MHz.
> 
> Hi Tony.
> 
> Same problem here.  It started when I installed my microHam microKeyer.  Are
> you using the same thing?  I have an ICOM 756 Pro III.
> 
> I asked Paul to add a feature to throw out frequencies like this and re-scan
> the radio.  It has not happened.


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us