SV: [Dx4win] Can I configure the banddecoder output?

[Teemu, SM0WKA]

You can also build that same circuit by yourself for maybe $4 on simple Vero
board. K6XX has made one for FT1000MP band-data but it is exactly the same
voltages coming out from the Parallel port of the computer.
http://www.k6xx.com/radio/mpbandbx.html

Happy soldering

73 de
Teemu SM0WKA - SM0W

> -----Ursprungligt meddelande-----
> Från: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net] För Anders Janis SM4RNA
> Skickat: den 7 september 2005 08:43
> Till: Dx4win at mailman.qth.net
> Ämne: Re: [Dx4win] Can I configure the banddecoder output?
> 
> Thanks. Looks great. $20 for international shippong maks it close to $40.
> Maybe I can find someone else here that wants one and split the shipping.
> 
> An advantage to be able to set freq ranges and output pins freely in
> DX4Win is that some non HAM freqs can be sent to a broadband dipole or
> what ever.
> 
> /Anders
> 
> 
> 
> 
> ----- Original Message -----
> From: "Pete Smith" <n4zr at contesting.com>
> To: "Anders Janis SM4RNA" <sm4rna at telia.com>; <Dx4win at mailman.qth.net>
> Sent: Monday, September 05, 2005 12:21 PM
> Subject: Re: [Dx4win] Can I configure the banddecoder output?
> 
> 
> > W9XT makes a very inexpensive band decoder board that provides 10
> outputs.  It is less than US$20 plus shipping.  I am using two of them in
> a dual band decoder built in an old printer switch cabinet.
> >
> > 73, Pete N4ZR
> >
> > At 04:43 AM 9/5/2005, Anders Janis SM4RNA wrote:
> > >Hi Guy!
> > >
> > >Thanks for quick awnser.
> > >
> > >I guess it could be easy to implement, but then you would get in a
> conflict of intrests. Hi hi!
> > >
> > >/Anders
> > >
> > >----- Original Message -----
> > >From: "ON4AOI" <on4aoi at skynet.be>
> > >To: "'Anders Janis SM4RNA'" <sm4rna at telia.com>
> > >Cc: <Dx4win at mailman.qth.net>
> > >Sent: Monday, September 05, 2005 10:35 AM
> > >Subject: RE: [Dx4win] Can I configure the banddecoder output?
> > >
> > >
> > >> Hi Anders,
> > >>
> > >> No you can't change the pin out on the LPTport
> > >> Available is a BCD code output
> > >>
> > >> 73 Guy ON4AOI
> > >>
> > >> BAND DECODER and related stuff at
> > >>
> > >> http://www.on4aoi.be/banddecoder.htm
> > >>
> > >> DX4WIN soft and related stuff at
> > >>
> > >> http://www.on4aoi.be/dx4win.htm
> > >>
> > >> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at
> > >>
> > >>  http://www.on4aoi.be/keyer.htm
> > >>
> > >> ARSWIN link and related stuff at
> > >>
> > >> http://www.on4aoi.be/web7.htm
> > >>
> > >> DXTELNET soft and related stuff at
> > >>
> > >> http://www.on4aoi.be/dxt.htm
> > >>
> > >>
> > >> -----Original Message-----
> > >> From: dx4win-bounces at mailman.qth.net [mailto:dx4win-
> bounces at mailman.qth.net]
> > >> On Behalf Of Anders Janis SM4RNA
> > >> Sent: Monday, September 05, 2005 9:34 AM
> > >> To: Dx4win at mailman.qth.net
> > >> Subject: [Dx4win] Can I configure the banddecoder output?
> > >>
> > >> Hi all!
> > >>
> > >> Is it possible some how to configure what pin(s) are activated in the
> > >> paralellport connector when changing band? If it could be (like in
> Ham Radio
> > >> Delux ) I would not need a banddecoder to select antenna. Then I
> could just
> > >> let each pin drive a optocoupler controlling a coax relay.
> > >>
> > >> /Anders
> > >> _______________________________________________
> > >> Dx4win mailing list
> > >> Dx4win at mailman.qth.net
> > >> http://mailman.qth.net/mailman/listinfo/dx4win
> > >>
> > >>
> > >>
> > >>
> > >_______________________________________________
> > >Dx4win mailing list
> > >Dx4win at mailman.qth.net
> > >http://mailman.qth.net/mailman/listinfo/dx4win
> >
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win