[Dx4win] Group numbers

[Dave Sharred]

Just tested this ; I reassigned all my logs to another group , but zero.

now, doing F8, and selecting group 0   shows no QSO's.

Then that makes my first note correct - there must be a bug that means
DX4WIN can't select groups when printing QSL's for Group zero

All other groups work ok, where group names are entered

Dave
G3NKC

-----Original Message-----
From: dx4win-bounces at mailman.qth.net
[mailto:dx4win-bounces at mailman.qth.net]On Behalf Of Jim Reisert AD1C
Sent: 27 January 2005 03:20
To: w2lk at earthlink.net; dx4win at mailman.qth.net
Subject: RE: [Dx4win] Group numbers


Les, I think I mis-spoke.  You are right.

At 09:40 AM 1/26/2005, Les Kalmus wrote:
>Doing a search using F8 and group 0 gets me only the QSOs assigned to group
>0 which is what I would expect. I used 0 for all the QSOs with my original
>call. I have changed that group name to K2SHL.
>If 0 = all QSOs, then shouldn't I get them all in that search?
>Is there something I'm missing?
>
>73, Les W2LK
>
>-----Original Message-----
>From: dx4win-bounces at mailman.qth.net
>[mailto:dx4win-bounces at mailman.qth.net]On Behalf Of Jim Reisert AD1C
>Sent: Tuesday, January 25, 2005 5:08 PM
>To: dx4win at mailman.qth.net
>Subject: Re: [Dx4win] Group numbers
>
>
>There are three reserved group numbers in DX4WIN:
>
>   0 = all QSOs
>254 = QRP
>255 = YL
>
>I may have the last two reversed.


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win