[Dx4win] PSK31 PTT stuck on TX

[Jay Hainline]

So far, no luck. It still hangs up. My Icom is set up on COM1 using a CT-17
interface so my PTT is on COM2 through a rigblaster interface. I tried
playing with different settings but to no avail. Something in the program
wants to keep the DTR or RTS high for some reason.

Jay Hainline  KA9CFD  EN40om
Colchester, IL
ka9cfd at arrl.net

-----Original Message-----
From: STAN1ZX [mailto:n1zx at arrl.net] 
Sent: Saturday, May 22, 2004 18:08
To: ka9cfd at winco.net
Subject: Re: [Dx4win] PSK31 PTT stuck on TX


in File>preferences, check the Radio for type, address, baud rate, comport.
check DTR, RTS Next open the  psk31 screen and right click on the bottom of
the screen and go to <settings> in settings click on TX and set <PTT> to CW
Interface and click  keyline <DTR> try that and see if it helps



73
STAN    N 1 Z X

PGP Version:8.0.2  Fingerprint
9543 35A9 8343 F5AA 6353  83BB 6D1E BE23 3D44 7F2C

Scanned by Norton Anti Virus System

Any Sufficiently Advanced Technology
is Indistinguishable from Magic"
                          ---Arthur C. Clarke


----- Original Message ----- 
From: "Jay Hainline" <ka9cfd at winco.net>
To: <dx4win at mailman.qth.net>
Sent: Saturday, May 22, 2004 1:58 PM
Subject: RE: [Dx4win] PSK31 PTT stuck on TX


nope, that doesn't work. The psk31 transmission ends but the radio stays
keyed.

Jay Hainline  KA9CFD  EN40om
Colchester, IL
ka9cfd at arrl.net

-----Original Message-----
From: STAN1ZX [mailto:n1zx at arrl.net]
Sent: Saturday, May 22, 2004 17:49
To: ka9cfd at winco.net
Cc: N.1.Z.X.
Subject: Re: [Dx4win] PSK31 PTT stuck on TX


I am not having that problem with the TX being stuck.
a couple of things though are you manually clicking on the TX to turn on the
Transmitter ? or are you sending from a macro ? if you are running from a
macro, you have to include the turn off signal at the end and if you are
clicking on TX, it may also require you to unclick, Just a thought

73
STAN    N 1 Z X

PGP Version:8.0.2  Fingerprint
9543 35A9 8343 F5AA 6353  83BB 6D1E BE23 3D44 7F2C

Scanned by Norton Anti Virus System

Any Sufficiently Advanced Technology
is Indistinguishable from Magic"
                          ---Arthur C. Clarke


----- Original Message ----- 
From: "Jay Hainline" <ka9cfd at winco.net>
To: <dx4win at mailman.qth.net>
Sent: Saturday, May 22, 2004 12:15 PM
Subject: RE: [Dx4win] PSK31 PTT stuck on TX


I have the same problem here Jose. I posted to the reflector the other day
but have not received a response back from anyone. I am able to run psk31
using vox but it is not the preferred way for me. Obviously the DTR and RTS
are staying high once transmit is started. I have tried switching to either
one with no success in the psk31 settings window. There was no problem in
version 5.03.

73 Jay

Jay Hainline  KA9CFD  EN40om
Colchester, IL
ka9cfd at arrl.net

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Jose Ng Lee
Sent: Saturday, May 22, 2004 15:51
To: Dx4win at mailman.qth.net
Subject: [Dx4win] PSK31 PTT stuck on TX


Hi,

I tried DX4WIN 6.03 PSK31 with setting PTT keying on COM1.  My problem with
version 6.03 is that after ending the PSK31 transmission the PTT is stuck in
TX and doesn't go back to RX.  I tried the same setting on old version 5.03
and PSK31 works fine.  Also, tried another PSK31 software WINPSKse and PTT
TX/RX works fine.

Is anyone else experiencing the same PSK31 PTT stuck on TX problem?

Thanks,

JOSE / HP2CWB


_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win


_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win




_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win